T

Team Associated

RC10B7.1D

1/10 · Buggy · 2S LiPo

Prices by Retailer

Best

AMain Hobbies

Updated 20h ago

About the RC10B7.1D

The Team Associated RC10B7.1D Team is a 1/10 scale 2WD competition buggy kit for dirt and low-grip clay tracks. It is not a ready-to-run car. You build it from the box, and you supply the motor, ESC, servo, radio, battery, wheels, tires and body paint. That is normal for race buggies, because racers choose electronics to suit their class and track.

The B7.1 platform comes in two versions with fully interchangeable parts. The B7.1 is set up for carpet, astroturf and high-grip clay, with a high-volume gear diff, stiffer springs and higher pack pistons. The B7.1D is tuned for dirt and low-grip surfaces, with a ball differential, softer springs and smoother damping. Team Associated lists these updates for the B7.1 generation: a revised three-gear laydown transmission with less rotational mass, strengthened front arms with a hinge-pin brace, lighter steering and caster blocks, lowered shock towers and arm mounts for a lower center of gravity, and updated long-arm suspension with KPI-adjustable steering blocks.

The chassis is 7075-T6 aluminum, the shocks are big-bore, and the electronics layout is weight-centralized for balance. The car is 15.35 inches long. As with any race kit, the setup options are the point. Arm mounts, steering geometry, shock setup and drivetrain options can all be tuned for a particular track.

Key Specs

Scale
1/10
Drive
2WD
Motor
Not included (kit: choose your own)
Battery
2S LiPo, shorty size (not included)
Top Speed
Depends on motor and gearing

Who It's For

The B7.1D is for someone racing, or planning to race, 1/10 2WD buggy at a local dirt or low-grip clay track. It suits a racer who already owns electronics or wants to choose their own, and who enjoys building and tuning. It is not a good first RC car or a backyard basher: building it takes time, and the finished car is designed for groomed tracks. If you race on carpet, astroturf or high-grip clay, the standard RC10B7.1 is the version to look at.

Upgrade Notes

With a kit, the first purchases are the parts needed to finish it. Team Associated lists a 1/10 electric motor and ESC, a 2S LiPo in 'shorty' dimensions, a charger, a two-channel surface radio and receiver, a steering servo, polycarbonate paint for the body, 1/10 off-road wheels and tires, tools and silicone fluids. Most racers choose a motor and ESC to match their racing class (often a 'stock' or 'modified' spec), so check your track's rules before buying.

After the build, tuning matters more than upgrades. Shock oil, springs, diff setup and tires for your track's conditions make the biggest difference, and the interchangeable B7.1 parts let you move toward a high-grip setup if your track changes.

Common first mods:brushless motor and ESC, shorty 2S LiPo, steering servo, surface radio, track tires

Compatible Parts

Track prices → Premium
JConcepts Mono 2.2 Rear Wheels (White) (4) (B7/B6/B74/RB6) w/12mm Hex$12.75
JConcepts Mono 2.2 Rear Wheels (Yellow) (4) (B7/B6/B74/RB6) w/12mm Hex$12.75
Team Associated 3.5mm Ball Cups (14)$9.99
JConcepts Mono 2.2 Front Wheels (White) (4) (B7/B6/B5/RB6) w/12mm Hex$11.05
Team Associated 13mm Shock Caps (4)$10.99

Get alerts when any part drops in price

Upgrade to Premium →

Want an alert when this price drops?

Sign up free →

Price History (last 30 days)

Premium shows 90 days of history.